Home heating accounts for about 60 to 75% of your household’s total energy consumption. This percentage has a direct impact on your energy bill. You therefore pay a higher bill. Do you want to reduce this rate while enjoying sufficient thermal comfort? To achieve this result, you do not necessarily need to take over the heating installation. There are several ways of doing this.
Take care of the insulation of your house
The first thing to do is to carry out insulation work in your home. You also need to develop certain habits. The aim of both these measures is to prevent heat leaks outside the home, once you have installed the heating equipment offered. In this way, you will be able to reduce your energy consumption and lower your bill. Small, simple gestures can help you do this:
- Close your windows at night. This will simply prevent the heat from escaping. You should also check your home for holes or cracks. Heat could leak out through these. If you find any, be sure to fill them in completely.
- Remember to insulate your heating pipes. You can do this by sheathing the pipes of your heating system with thermal insulation. You can also unroll rock or glass wool on the floor of your attic. You may not know it, but the roof alone can account for 30% of a house’s heat loss.
Also, don’t worry about financing the insulation work on your home. The energy bonus can help you partially cover the cost of work to reduce your energy consumption. It is a program of the Energy Savings Certificate schemes. All households can benefit from the energy bonus to make their energy renovation projects a success.
Manage your home heating
Saving your home’s energy doesn’t just depend on insulation. Optimal management of your heating system plays a very important part in this process.
You can turn the heating down or off. If you use electric heating, you can easily turn it down when you go out or if you are going to be away for a few days. If you have to turn it off throughout the winter, consider putting it in “frost-free” mode by setting it to a temperature between 50°C and 60°C.
It is also possible to adapt the temperature to the place where you are in the house. To do this, remember to equip yourself with a thermostat with a programmer. This way, you can easily adjust the temperature in each room at any time of day. If you have electric heating, turn to radiant panel radiators associated with heat exchanges. These devices allow you to store the heat and redistribute it according to the schedule you have established.
Also, be careful not to place your furniture too close to the boiler. These can absorb all the heat produced. This could force you to raise the temperature and spend more energy.
Renovate your equipment
If your appliances are old or are starting to malfunction, it would be better to think about changing your heating system. You should ensure regular maintenance and replacement if it becomes necessary.
Depending on the type of housing you have, you should install the most economical heating system. For example, you might ask yourself which heating system to choose for an old house? But you don’t have to worry, because there are solutions for every type of housing.
Furthermore, if you have an electric boiler, you can also think about renovating your electric heating system. You can add tools to your heating system that will allow you to manage the heat in your home. You will then save more energy.
Finally, to reduce your energy consumption, it is essential that you consult all the offers from suppliers and compare them. There are several providers on the market that offer different solutions, each one more interesting than the other. So don’t hesitate to make a comparison of the rates offered in order to choose the solution that will allow you to make big savings.